+49 (0) 8076 - 9187-0 info@lisa-lift.de

LED lighting


Customized car lighting:
The LED ceiling panels (LDP), customized for your lift car. We manufacture in any size according to the customer’s request. Depending on size, the panel consists of one or several rectangular segments covering the entire car ceiling or only a part of it.

Maximum size of a segment = Lmax x Wmax x Dmax= 2500 x 500 mm x 20 mm.
Therefore, the maximum panel size Gmax = Lmax x Wmax x Smax.
(Smax = number of segments)
For reasons of installation, Smax should be n<= 4.

The LDP is equally suited for retrofitting and/or upgrades and for new systems

One-man installation:
As the baseplate consists of aluminum and the frame of 1 mm stainless steel, the panel weight is primarily defined by the light-conducting material (acrylic / Makrolon). Therefore, and when using powerful pot holding magnets, installation is a walk in the park which can be carried out by only one person. (A must for using such magnets is, of course, a magnetic car ceiling).

Technical data:
The light intensity of 100 lux one meter above the floor required by EN81-20 is exceeded. Depending on the car paneling and size it is approx. 300 – 400 lux, nevertheless glare is low when directly looking at the ceiling. Supply is principally realized by provided 24V power adapters. For a panel size of 1000 x 1200, for instance, a 60W power adapter is sufficient. The standard light color is 6000K (daylight white).Optionally instead of acrylic: Makrolon version (fire protection class B1)


The LWP covers the car height and is manufactured according to the customer’s width request. Usually it is installed instead of a car panel.

For retrofitting, a car panel is removed and replaced by the LWP of corresponding width.

The LWP consists of a central 1 mm stainless steel strip framed by light strips to the left and right. For mounting, the flush LWP is simply placed on the wall and held by magnets.

Technical data:
The light intensity of 100 lux one meter above the floor required by EN81-20 is achieved along the entire car height.

Glare is low when looking directly at the panel. Supply is realized by a power adapter with 60W and 24V. The standard light color is 6000K (daylight white).

Optionally instead of acrylic: Makrolon version (fire protection class B1)


Using an Endlighten Plexiglas rod with a diameter of 40 mm instead of a stainless steel handrail does not only cover the handrail function but also allows for setting appealing light accents in the car. Here the fronts of the rod are illuminated by a 3W LED spot each. The LED light is emitted on the rod surface with an efficiency of up to 90%, sufficient for complete car lighting provided your brightness expectations are not too high.

The LHL is manufactured according to the customer’s request in the dimensions defined by the car. It is either installed between to car walls or between a car wall and a console control panel. As all fastening components are mounted from the inside of the car, mounting is fairly simple – even subsequently.

Durch die weitere Nutzung der Seite stimmen Sie der Verwendung von Cookies zu. Weitere Informationen

Die Cookie-Einstellungen auf dieser Website sind auf "Cookies zulassen" eingestellt, um das beste Surferlebnis zu ermöglichen. Wenn du diese Website ohne Änderung der Cookie-Einstellungen verwendest oder auf "Akzeptieren" klickst, erklärst du sich damit einverstanden.